Advertisement for Bids & Notice of Public Meeting for Proposed Alternate Bids for Preferred Products- Equine CT Room Renovation- CVM Main

Sealed proposals will be received by NC State University. Attention Melanie Butler, until 1:00pm on December 16, 2021, in conference room 301, Administrative Services III Building, 2601 Wolf Village Way, Raleigh, NC 27695 (virtual meeting option) and immediately thereafter publicly opened and read for the furnishing of labor, material and equipment for the construction of:

North Carolina State University
Equine CT Room Renovation – CVM  Main
SCO# 21-23162
NC State# 202120001

This project renovates room D220 and D220D in the CVM Main Building to accommodate future medical CT equipment. This will allow staff to improve how equine are handled during the procedure. The scope includes improvements for equipment radiation shielding, new openings for maneuvering animals, and reinforced concrete pit for future standing CT scan system and hydraulic table. This renovation will also update the room conditions to meet washdown requirements.

Bids will be received for single prime bid contracts.  All Proposals will be lump sum.

The following General Contractors have been pre-qualified to bid this job:

  • ACH Constructors………………………………………..Durham, NC
  • Bordeaux Construction……………………….…………..Raleigh, NC
  • CMC Building, Inc………..………………………………Bolton, NC
  • CT Wilson Construction…………………………………Durham, NC
  • Dewberry Design Builders………………………………Raleigh, NC
  • Elford, Inc………………………………………………….Charlotte, NC
  • McDonald York Building Co…………………………….Raleigh, NC
  • McKenna Construction…………………………………..Morrisville, NC
  • Resolute Building Co…………………………………….Chapel Hill, NC
  • Riggs-Harrod Building Co……………………………….Durham, NC
  • Riley Contracting Group…………………………………Cary, NC
  •   SAMET Corporation………………………………………Raleigh, NC

Bid documents are available for examination in the plan rooms:

  1. iSQFT; http://www.isqft.com/start/ handles Associated General Contractors plan room.
  2. The local North Carolina offices of Dodge Data and Analytics;
  3. The Eastern Regional Offices of CMD Group in Norcross, GA;
  4. The offices of the Designer: Wagner Architecture, 92 Elam Court, New Hill, NC 27562
  5. The North Carolina Institute of Minority Economic Development, Inc. (NCIMED) Plan and Resource Center at 114 W. Parrish St., 6th Floor, Durham, NC; 919-956-8889 or 919-287-3036
  6. The Hispanic Contractors Association of the Carolinas (HCAC) in Winston-Salem, Charlotte and Raleigh Areas – 877-227-1680;

Complete plans and specifications for this project in electronic format can be obtained from Kim Wagner, Wagner Architecture, 92 Elam Court, New Hill, NC, during normal office hours after November 21, 2021. Email requests for the electronic documents may be sent to kwagner@wagnerarch.com.

The State reserves the unqualified right to reject any and all proposals.

North Carolina State University has an affirmative policy of fostering, promoting and conducting business with minority owned enterprises.  Minority contractors are encouraged to participate in the bidding process.

The bidder must include completed minority business subcontractor documentation form(s) with their proposal or the bid may be considered non-responsive and invalid.

Pre-Bid Meeting
A Pre-bid meeting will be held for all interested bidders on November 30, 2021, at 2:00pm in conference room 301, Administrative Services III Building, 2601 Wolf Village Way, Raleigh, NC 27695 The meeting will address project specific questions. Virtual meeting option.

Notice of Public Meeting for Proposed Alternate Bids for Preferred Products.
An open public meeting will be held on November 30, 2021, at 2:30pm in conference room 301, Administrative Services III Building, 2601 Wolf Village Way, Raleigh, NC 27695.  The meeting is to identify preferred brand alternates and their performance standards pertinent to this project. 

In accordance with GS133-3, Section 64. (C) and State Construction Office procedures the following preferred brand items are being considered as Alternates by the owner for this project:

Rema Tip Top T-Rex 60, 5/16” thick 1” diamond industrial rubber flooring.

Hardware – mortise locks by Best, closers by LCN and cylinders by Schlage.

A copy of pertinent sections of the performance standards may be obtained by contacting the designer at the address or phone number noted above.

Melanie Butler
North Carolina State University
Capital Project Management
mdbodenh@ncsu.edu
919.515.8059