Sealed proposals will be received by NC State University. Attention David Hammock, until 3:00 pm on December 4, 2024, in Conference Room 101, Administrative Services III Building 2601 Wolf Village Way, Raleigh, NC 27695, and immediately thereafter publicly opened and read for the furnishing of labor, material, and equipment for the construction of:
NC State University
Brooks Hall Renovations, Phase I
SCO ID No.: 22-25338-02A
NC State Project No.: 202220022
Phase one of this project renovates the first floor of Brooks Hall’s Matsumoto Wing to create flexible research space for the College of Design and includes offices, collaborative space, a break area, and a K12 Lab. The scope also includes a new mechanical room with a central air handler that serves the renovated first floor and includes space for future AHUs, VAVs, distribution duct, utility chase, and a roof-mounted ERV that preconditions outside air.
Bids will be received for single prime bid contracts. All Proposals will be lump sum.
The following General Contractors have been pre-qualified to bid this job:
- ACH………………………………………………………………………………… Raleigh, NC
- Bridgepoint…………………………………………………………………….. Durham, NC
- CMC…………………………………………………………………………………. Bolton, NC
- Consigli…………………………………………………………………………… Raleigh, NC
- CT Wilson………………………………………………………………………. Durham, NC
- Daniels & Daniels……………………………………………………….. Goldsboro, NC
- Lomax………………………………………………………………………. Greensboro, NC
- McKenna………………………………………………………………………… Raleigh, NC
- Messer……………………………………………………………………………. Raleigh, NC
- Monteith………………………………………………………………………….. Raleigh, NC
- Riggs-Harrod…………………………………………………………………… Raleigh, NC
- Riley……………………………………………………………………………………. Cary, NC
- Salisbury & Moore…………………………………………………………… Raleigh, NC
- Shelco…………………………………………………………………………….. Raleigh, NC
- WC Construction………………………………………………… Winston-Salem, NC
- Whiting-Turner………………………………………………………………… Raleigh, NC
Bid documents are available for examination in the plan rooms:
- iSQFT; http://www.isqft.com/start/ handles Associated General Contractors plan room.
- The local North Carolina offices of Dodge Data and Analytics;
- The Eastern Regional Offices of CMD Group in Norcross, GA;
- The offices of the Designer: Insitu Studio, 704 N Person St., Raleigh, NC 27604;
- The North Carolina Institute of Minority Economic Development, Inc. (NCIMED) Plan and Resource Center at 114 W. Parrish St., 6th Floor, Durham, NC; 919-956-8889 or 919-287-3036
- The Hispanic Contractors Association of the Carolinas (HCAC) in Winston-Salem, Charlotte and Raleigh Areas – 877-227-1680;
Complete plans and specifications for this project in electronic format can be obtained from Insitu Studio, 704 N Person St., Raleigh, NC 27604 during normal office hours after October 27, 2024. Email requests for the electronic documents may be sent to zach@insitustudio.us.
Full printed copies may be obtained by those qualified as prime bidders, upon deposit of Three hundred dollars ($300) in cash or certified check with a minimum of 48 hours’ notice to zach@insitustudio.us. The full plan deposit will be returned to those bidders provided all documents are returned in BOUND, good, usable condition within ten (10) days after the bid date.
Partial or full printed copies of the project documents may be purchased from Duncan Parnell, 201 Glenwood Ave, Raleigh, NC 27603. The phone number for ordering is 919-833-4677.
The State reserves the unqualified right to reject any and all proposals.
North Carolina State University has an affirmative policy of fostering, promoting, and conducting business with minority-owned enterprises. Minority contractors are encouraged to participate in the bidding process.
The bidder must include completed minority business subcontractor documentation form(s) with their proposal or the bid may be considered non-responsive and invalid.
Pre-Bid Meeting
A Pre-bid meeting will be held for all interested bidders at 3:00 pm on November 12, 2024, in Room 118 of Brooks Hall at 50 Pullen Road, Raleigh, NC 27695. The meeting will address project-specific questions.
Notice of Public Meeting for Proposed Alternate Bids for Preferred Products.
An open public meeting will be held at 4:00 pm on November 12, 2024, in Room 118 of Brooks Hall at 50 Pullen Road, Raleigh, NC 27695. The meeting is to identify preferred brand alternates and their performance standards pertinent to this project.
In accordance with GS133-3, Section 64. (C) and State Construction Office procedures the following preferred brand items are being considered as Alternates by the owner for this project:
door access system (reader controllers, card readers, electronic door strikes, access cards), door hardware (locksets and cylinders, closers, panic hardware, strikes, locks, and cores)
A copy of pertinent sections of the performance standards may be obtained by contacting the designer at the address or phone number noted above.
David Hammock, PE
NC State University
Design and Construction
david_hammock@ncsu.edu
919-515-2030